Description
TKI 360 AND MEGA 360 TRANSDUCER KIT
The TKI 360 and Mega 360 transducer kit includes a TKI CNC Rod Holder in 5″ or 10″ length, 360 Mounting/Hardware, shrink tube, and one selected base.
A TKI Base Nut Wrench may be added onto your order.
This kit lets you mount your Hummingbird 360 or Mega 360 assembly on any TKI CNC rod holder. Easy deployment by releasing the trigger and lifting the live pole unit with the transducer from the rod holder. The recommended length of the rod holder is 5″ unless the kit is being used on a wide gunnel Warrior or Lund Pro-V.
The kit includes a section of tube that will be placed over the mega 360 fiberglass pole. Also included are 2 pieces of shrink tube. One will be placed on either end of the aluminum tube before installing onto the Mega 360 shaft. After installing the shrink tube onto the aluminum tube, adjust the tube height to ensure ideal transducer placement. We normally will place the block with the TKI logo on it approximately 8 inches from the top of the pole, this can be adjusted depending on how deep or shallow you need to run the transducer and how deep your boat is. After the selected height is made you can use a heat gun to shrink the tubing onto the fiberglass pole and the aluminum tube section. Only use a hot air gun, as an open flame can damage the shrink tube or the fiberglass. If removal is needed, you can cut the shrink tube and remove the tube from over the fiberglass pole.
One base is included with the kit, but optional bases can be purchased to move the unit to additional locations within the water vessel or another vessel. (Sold Separately.)
BASE OPTIONS INCLUDE:
PLEASE CONFIRM RAIL SIZE BEFORE ORDERING!
1 1/16″ round rail: usually fits Jet Craft (most jet boats)
1″ round rail: usually fits Triton, Nitro
1″ square rail: usually fits Pontoons
7/8″ round rail: usually fits Ranger, Lund, Warrior
Flat base (drilling into gunnels, flat track mount)
Flat base with Ram rail plate (Ram Track system)
Flat base with Alumatrac mount
Flat base with Cisco/Traxtech plate
Flat base with Pontoon 1 1/4 square rail
New versions of the mega 360 kit includes a longer piece of aluminum tubing and 2 pieces of shrink tube. The shrink tube is used to mount the aluminum tubing to the mega 360 pole at the height of your choice.
Billet construction
Color: Graphite
100% made in the USA
Lifetime warranty against manufacturer defects.
Additional information
LENGTH | 10", 5" |
---|---|
BASE | FLAT BASE WITH PONTOON 1 1/4 SQUARE RAIL, 1-1/16" ROUND RAIL BASE, 1" ROUND RAIL BASE, 1" SQUARE RAIL BASE, 7/8" ROUND RAIL BASE, FLAT BASE (DRILLING INTO GUNNELS, FLAT TRACK MOUNT), FLAT BASE WITH RAM RAIL PLATE BASE (RAM TRACK SYSTEM), FLAT BASE WITH ALUMATRAC MOUNT, FLAT BASE WITH CISCO/TRAXSTECH PLATE |
You may also like…
-
TKI LIVE TRANSDUCER KIT
$430.00 – $547.00 Select options This product has multiple variants. The options may be chosen on the product page -
TKI BILLET FISHING ROD HOLDER
$265.00 – $362.00 Select options This product has multiple variants. The options may be chosen on the product page -
TKI ROD HOLDER BASES
$65.00 – $162.00 Select options This product has multiple variants. The options may be chosen on the product page