TKI 72" CARBON FIBER LIVE TRANSDUCER KIT

The complete kit includes a TKI CNC Rod Holder in 5", 7.5" or 10" length, 72" CARBON FIBER collapsible live pole w/ folding handle, and selected base. (Due to the collapsing feature of the pole, we do not notch the center hole as with our aluminum tube.) The transducer cord still goes through the center of the pole but is looped slightly and inserted up the center of the Carbon Fiber Pole. 

The TKI folding handle allows easy stowing of the live pole. All of our handles are made 18 inches long but can be cut down to the desired length.

The TKI Carbon Fiber live pole is 72 inches long with a diameter of 1 1/4 inches in diameter. It collapses down to just under 42" long

Allows you to mount your forward-facing sonar such as Humminbird Live Assembly (including Mega Live 2), Lowrance Active Target, or Garmin Panoptix Live Scope on any TKI CNC rod Holder. Easy deployment by releasing the trigger and lifting the live pole unit from the rod holder. 

Quickly stow and deploy your transducer within 10 seconds allowing for simple movement from location to location by releasing the rod holder trigger and removing the pole from the rod holder, collapse and stow. 

ARM LENGTH 

The arm length depends on the width of the gunnels. The measurement should be taken by measuring from the center of the mounting location (i.e. center of rail or track system) to the black bump stop on the outside of the boat. TKI recommends not having an arm longer .5-1" longer than this distance to prevent flexing in higher trolling speeds. (While not recommended, the TKI CNC live transducer pole will sustain trolling speeds of 10+ mph.)

ROD HOLDER BASE 

One base is included with the live pole kit, but optional bases can be purchased (sold separately) to move the unit to additional locations within the water vessel or another vessel. PLEASE CONFIRM THE RAIL SIZE PRIOR TO ORDERING!

BASE OPTIONS INCLUDE:

7/8" Round Base (141)

1" Round Base (142)

1-1/16" Round Base (143)

Flat Track Mount Base (144)

Flat Base with Pontoon 1 Square Rail (145)

Flat Base with Ram Rail Plate (146)

Flat Base with Cisco Plate (147)

Flat Base with Non- Cisco Track Plate (147EA)

Flat Base with Alumatrac (148)

Flat Base with Pontoon 1-1/4 Square Rail (149)

Flat Base with 90-degree SportTrak 3" Mount (150)

Flat Base with Wide 90-degree SportTrak 4" Mount (151)

Flat Base with SeaArk Mount (152)

Flat Base with Polar Kraft Mount (153)

Flat Base with Rear Nitro Mount (154)

Flat Base with 45-degree SportTrak Mount (155)

****For use with the Garmin Panoptix, you will need to remove the plastic nut around the plug, thread the cord through the tube, and then use one of the extra snap-on plastic nuts that are included with the Garmin transducer once threaded through your TKI live pole. Learn more here by watching the following:  https://www.youtube.com/watch?v=LUqLfCJm9xQ

Billet Aluminum construction on all bases and rod holders 

Carbon Fiber Pole 

Color: Graphite

Lifetime warranty against manufacturer defects.

DESIGNED AND MANUFACTURED IN THE USA WITH PREMIUM AMERICAN MATERIALS.

****THE TKI LIVE KIT DOES NOT INCLUDE A BASE NUT WRENCH. THOSE CAN BE ADDED TO YOUR ORDER.

********ONLY COMPATIBLE WITH THE TKI CNC BILLET ROD HOLDER******